Preventing Window Mold Infestation in Springfield Missouri

When the weather turns cold, condensation starts to build up on our windows and this leads to mold growing around the windows. This doesn’t have to be a cause for alarm, but you definitely want to take some precautions to prevent this. Not only because mold on your window sills is unsightly, but also because it can cause allergies and other symptoms for those living inside the home. You might think your toddler has a cold, but what if they really have a runny nose because of mold growing around their windows?

So, what causes this mold and how do we prevent it? Humidity and condensation are what’s causing it. The warm indoor air, meeting the cold, drafty areas around the window lead to condensation. Condensation is what you see when you see your windows are “sweating”. That moisture builds up around the window sills and/or trim, which can cause mold growth.

The good news about mold infestation around the window sills, or on the windows themselves, is that this is generally not too difficult to address. Cleaning these areas up are usually a job that the homeowner can take care of themselves, so you don’t necessarily have to get professionals involved.

It’s a whole other story if you have mold growing on the sheetrock below a window, because that is possibly caused from a window leak. You’ll definitely want to call in a mold remediation specialist if you see this happen to make sure they can assess the situation properly and take care of your window mold infestation in Springfield Missouri.

Wiping the areas down with distilled white vinegar, or a mold killer you can buy at the store is sufficient for this minor cleanup. The next step is stopping it from happening again. If you don’t fix the problem, then cleaning the windows and window sills off is only a temporary solution. You need to stop the moisture if you want to stop the mold growth.

Here’s a few things you’ll want to check to make sure you aren’t allowing moisture:

• Are your windows needing to be replaced due to poor quality, or age? If so, make sure to have high quality, well insulated windows installed.
• Make sure all gaps are caulked up and sealed well, inside and out.
• Keep your shades open to allow sunlight. This just helps keep the areas around your window dry and warm.

If you can’t stop the condensation and moisture from happening on and around your windows, then you’ll just need to make sure to dry them off every day. Bottom line: Stop the moisture. Stop the mold.